Polyurethane Foam

Feature

1. It has high expansion, adhesiveness, waterproof, heat preservation, sound insulation, heat insulation, heat insulation, pressure resistance, low heat transfer rate and low water absorption;
2. The products are widely used and diversified.
3. The product will not crack, shrink or rot for a long time after curing.
4. Can fill and bond different materials
5. It has the characteristics of simple operation, fast curing, strong practicability and low cost.

Use

1. Fixing, bonding, filling and heat preservation of door and window frames;
2. Seal. Heat insulation, heat preservation, sealing and filling of various pipelines.
3. Waterproof, heat preservation and sealing of walls, roofs and enclosure structures.
4. Fixing and bonding. Filling and insulation of interior materials.

Terminal Features

1 The normal operating environment temperature of this product is 5°C to 35°C.

2. After 10 minutes of foaming, it will not stick to hands (the surface is dry), can be cut in 60 minutes, and can withstand heavy pressure in 4 hours.
3. Product resistance after curing -30C to +80°C ambient temperature.
4. The product can be bonded to all building materials except polyethylene. Polypropylene, Silicone and PTFE5. After the product is cured, long-term exposure to ultraviolet rays should be prevented, and the exposed parts should be protected by coating with cement mortar, lime, paint or paint.
5. This product is non-toxic to the human body after curing

Notes

1. Avoid direct sunlight, and the ambient temperature outside the product tank should not exceed 40C
2. There is pressure in the tank, so it should not be placed in the driver’s cab during transportation, but should be placed in the trunk.
3. Do not spray on flames or hot surfaces.
4. The construction site of this product should have a ventilated environment, and smoking or approaching fire sources is strictly prohibited.
5. The viscosity of this product is high when it is not solidified, so care should be taken to protect it during operation.
6. When the foam is not cured, it can be wiped off with a special cleaning agent and thinner or acetone for polyurethane foam. If the foam is cured, it can be handled by hand.
7. Please keep the jar out of the reach of children.
8. If the foaming agent contacts the eyes, please rinse with water immediately or follow the doctor’s advice. In case of skin contact, wash off with soap and soapy water.
9. The product must be placed vertically, not backwards or sideways.
10. The product is stored in a dry and ventilated environment from +10*C to 35*C.
11. When using, it is best to spray water on the base surface, which is beneficial to improve the bonding strength and foaming rate.

Avoid prolonged skin contact with this product. Must be used in a ventilated place. Keep away from heat or sources of ignition. Store in a cool, dry place and avoid contact with unclean water. Allow remaining product to dry before disposing of it.